PDA

View Full Version : Bizhub c3350 66-33 jams


Custom Search


mrfuser
01-28-2021, 08:48 PM
Anyone see this before? Never once happens while I’m on site. 66-33 codes logged. Replaced all the tires in the adf and still they say jams. Regular paper, nothing special they say. I see no bulletins or firmware correcting this.

Thanks all!

k

WLIT
01-28-2021, 11:41 PM
Have you replaced the separation pad assembly as well? If used for a lot of scanning it might have a paper cut or be worn away enough to inhibit proper feeding or originals? Also, there's a drive clutch CL101 which drives the separator roll assembly which may be rusted/gummed up. Jam says paper went by registration sensor but didn't make it to the read sensor. Obviously, you'll want to blow out the sensors too.

Custom Search