DadO
11-18-2008, 12:47 PM
I had overburned toner supply motor on my biz 500 that is located under OACB (overall control board).
When motor arrived, I installed it and connected the OACB board. Machine now show c-6701
Counter is 840k and i want to consult whit experts on copytechnet before i do anything since this parts are little bit expensive
"AOC abnormality-AOC counter overflow"
relevant elect. parts are "CCD board, Exposure lamp,L1 inverter, scanner motor M2 and OACB"
Lamp and motor are working. I just checked flat cable that connect ccd and oacb and seems to work but nevertheless i will change it (2 weeks order)
I have 2 bulletins on this issue
Picasa Web Albums - Dario - PICTs (http://picasaweb.google.com/dado.copy/PICTs#5269980627784787314)
Picasa Web Albums - Dario - PICTs (http://picasaweb.google.com/dado.copy/PICTs#5269980632993108114)
CCD where never touched on this machine.
Did anybody experienced any simmilar problem and any open opinion would come in handy! since i don't want to believe it is an OACB and my valet too :(
When motor arrived, I installed it and connected the OACB board. Machine now show c-6701
Counter is 840k and i want to consult whit experts on copytechnet before i do anything since this parts are little bit expensive
"AOC abnormality-AOC counter overflow"
relevant elect. parts are "CCD board, Exposure lamp,L1 inverter, scanner motor M2 and OACB"
Lamp and motor are working. I just checked flat cable that connect ccd and oacb and seems to work but nevertheless i will change it (2 weeks order)
I have 2 bulletins on this issue
Picasa Web Albums - Dario - PICTs (http://picasaweb.google.com/dado.copy/PICTs#5269980627784787314)
Picasa Web Albums - Dario - PICTs (http://picasaweb.google.com/dado.copy/PICTs#5269980632993108114)
CCD where never touched on this machine.
Did anybody experienced any simmilar problem and any open opinion would come in handy! since i don't want to believe it is an OACB and my valet too :(