Naveed Shahid
02-26-2021, 02:51 PM
Hello Every One,
konica minolta bizhub press c7000 showing error c0103 i changed paper feed motor but problem still remain same
any advice plz
Thanks
blackcat4866
02-27-2021, 12:30 AM
Did you clear the error: zero out DIPSW 35-0, 35-1, 35-2, 35-3, 35-4, 35-5?
Motor M1 is driven by the paper feed board (PFDB) and front door switches (SW1 & PS23).
If there are ICPs on the C7000, there are no details in the manual.
When I looked at the C1070 manual, there is no ICP specific to the paper feed motor M1.
=^..^=
tsbservice
02-27-2021, 06:49 AM
Dead FS-612 (https://www.copytechnet.com/forums/konica-minolta/146369-dead-fs-612-a.html)
ICP list provided by Synthohol.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.