PDA

View Full Version : Error Code BHC3100P with Error C151


Custom Search


Muncha
03-11-2021, 02:22 AM
I have ordered a new SSD for this printer, but I was curious if there was a "Special Boot Up" procedure to get me directly to Service Mode, or at least force Firmware update. I'm newish to KM printers and their secrets...

allan
03-11-2021, 06:47 AM
I have ordered a new SSD for this printer, but I was curious if there was a "Special Boot Up" procedure to get me directly to Service Mode, or at least force Firmware update. I'm newish to KM printers and their secrets...


This is not a KM machine by design so even the KM guys don't know all the kungfu behind this POS printer.
Hope someone can give you a more helpful reply.

jwai
03-13-2021, 04:46 PM
The service manual said this error refers to MFPB, not SSDB.

jwai
03-15-2021, 01:05 PM
Sorry for mistake.
I check the trouble code and there isn't has C151 on this model.

Muncha
03-16-2021, 01:03 AM
48611

Muncha
03-25-2021, 01:11 AM
Just a heads up, I finally received the Memory Board, fitted and all is well, no more C151. I have updated firmware and all seems well.

Custom Search