Colour Density Issue Konica Minolta 1060L

[leecot]

Hi All,

Looking for some help. We have a problem which we believe is a colour density problem - image attached.

There is a 1 - 2 inch band of low density along the nearside long edge which has my tech guys a little stumped. If affects all colours, although black does seem to more affected than the others.
We've tried new drums, new developer, new coronas, new transfer belt and rollers, swapped the fuser and transfer unit from our second 1060 without any success. We've done the colour density via ColorCare and various other density options on the press.

Any help or advise would be greatly appreciated. 48569

[blackcat4866]

Is there a repeating interval? =^..^=

[lartis.aineias]

Hi All,

Looking for some help. We have a problem which we believe is a colour density problem - image attached.

There is a 1 - 2 inch band of low density along the nearside long edge which has my tech guys a little stumped. If affects all colours, although black does seem to more affected than the others.
We've tried new drums, new developer, new coronas, new transfer belt and rollers, swapped the fuser and transfer unit from our second 1060 without any success. We've done the colour density via ColorCare and various other density options on the press.

Any help or advise would be greatly appreciated. 48569Go to the R-9 page on service manual to see the procedure! https://uploads.tapatalk-cdn.com/20210312/cb4fcfa267c6e32f8f2172bdd558ab61.jpg

Στάλθηκε από το SM-G975F μου χρησιμοποιώντας Tapatalk