View Full Version : Error Code Konica C280 every morning error C-2558
ferro10
03-19-2021, 01:01 PM
Hi The customer tells me that the error c2558 appears every morning
I replaced the Developer BK unit with a used but with a new chip. The problem did not solve know what can be?
I was thinking of a problem with HV or the Sub Hopper Assy?
PS: Sorry for my bad English
copier tech
03-19-2021, 04:18 PM
Hi The customer tells me that the error c2558 appears every morning
I replaced the Developer BK unit with a used but with a new chip. The problem did not solve know what can be?
I was thinking of a problem with HV or the Sub Hopper Assy?
PS: Sorry for my bad English
Fit a new K dev & image unit.
Also fit a genuine toner if you are using compatibles.
ferro10
03-19-2021, 05:04 PM
Toner is genuine
I can try with a new developer
The one I had taken used had very few copies under 50k
ferro10
03-19-2021, 05:08 PM
Error list
IMG 20210319 170721697 — Postimages (https://postimg.cc/qNc1Ym0V)
konicavod
03-19-2021, 06:25 PM
look at the level history 1. take photo.
print 20 halftone pattern 250 from test mode.
look at the level history 1. take photo.
post photos.
ferro10
03-22-2021, 12:24 PM
look at the level history 1. take photo.
print 20 halftone pattern 250 from test mode.
look at the level history 1. take photo.
post photos.
Ok as soon as I go to the customer I try
Meanwhile I went to the customer to reset the Developer group again and replace the HV Let's see if the problem recurs.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.