PDA

View Full Version : bizhub C287 - Medical Images


Custom Search


dscmanga
03-19-2021, 07:50 PM
Good afternoon. I am having difficulties to set up printing for medical exams. Even turning to pure black the impression comes out with shades of green which leaves the exam out of the standard. Can someone give me the configuration they use to test my equipment?

Correct Image
48644

Wrong image
48643

blackcat4866
03-19-2021, 08:00 PM
For starters, you'll get better results with pure black disabled.

This particular image is not very handy for diagnosing image quality issues. Try printing something like this, and post the results.

tsbservice
03-19-2021, 08:12 PM
Good afternoon. I am having difficulties to set up printing for medical exams. Even turning to pure black the impression comes out with shades of green which leaves the exam out of the standard. Can someone give me the configuration they use to test my equipment?

Correct Image
48644

Wrong image
48643

Print from Utility Consumable parts life or post a picture of it. Also what are counters - total and color?
This model is KonMin entry for office A3 copier and you can't expect very good colors as such.
But really start with charts blackcat gives you.

dscmanga
03-19-2021, 08:30 PM
Good afternoon friends. The equipment is new, with less than 200 color pages and 10 mono pages.


The problem is that when I put the composite black to make the images that would have to come out in black and white come out in another shade, but the black background of the exams come out perfect.


When I send in pure black, the black background is flawed but the tonality is correct.


I already looked for color curve software, but I only found it for larger equipment.


I believe that something like okidata's PSGAMMA is missing to fine-tune it.

Synthohol
03-19-2021, 09:14 PM
If the software allows print the images to a PDF and print the PDF from Adobe or foxit reader

If it changes then the medical software is to blame.
Also id double check and make sure they us the PS driver that is model specific not that universal garbage bag driver.

konicavod
03-20-2021, 07:01 AM
I already looked for color curve software, but I only found it for larger equipment.

When you are using the PCL driver, you can adjust Color Balance.
Specifying the color and image quality

(https://manuals.konicaminolta.eu/bizhub-C287-C227/EN/contents/id01-_102037379.html)

Walterj
03-21-2021, 09:22 AM
[QUOTE = dscmanga; 1712848] Buenas tardes. Tengo dificultades para configurar la impresión para exámenes médicos. Incluso al volverse negro puro, la impresión sale con tonos de verde que dejan el examen fuera del estándar. ¿Alguien puede darme la configuración que usa para probar mi equipo?

Imagen correcta Imagen
48644

incorrecta
48643[/ QUOTE]


Indicates which printer driver you are using PCL or PS and which program you are working with.

dscmanga
03-22-2021, 12:48 PM
Good Morning. Sorry for the delay to return.


I have already used the following drivers: PLC6, Universal PCL6, PS and PS-SP.


Everyone had the same problem when I switch to pure black.


The real problem is when I change to pure black, the background of the exam that needs to be plated is in shades of gray. However, in the composite black the black of the background is perfect, but the images are in different shades of the screen.

dscmanga
03-22-2021, 12:50 PM
[QUOTE = dscmanga; 1712848] Buenas tardes. Tengo dificultades para configurar la impresión para exámenes médicos. Incluso al volverse negro puro, la impresión sale con tonos de verde que dejan el examen fuera del estándar. ¿Alguien puede darme la configuración que usa para probar mi equipo?

Imagen correcta Imagen
48644

incorrecta
48643[/ QUOTE]


Indicates which printer driver you are using PCL or PS and which program you are working with.


Now I am using the PS driver and I use the WTT to send the exams.

emujo2
03-22-2021, 02:09 PM
Worst porn ever..BTW, the image you say is good, that's a screen capture not a sample from some other copier..Have you tried running the screen calibrations in the driver?

dscmanga
03-22-2021, 04:58 PM
Worst porn ever..BTW, the image you say is good, that's a screen capture not a sample from some other copier..Have you tried running the screen calibrations in the driver?


This, the correct one is a screenshot of the printing software, which would be the black and white tone that doctors approve.


The image below is the impression of the equipment that comes out green in the composite black.


When I change it to pure black, the image that has to have the black background filled comes out with flaws in gray, this is not approved by doctors.


Is there any software that does color curve calibration like Okidata's PSGAMMA? I tried to use COLOR CENTRO but it´s only for Konicas PRO.

48672

dscmanga
03-22-2021, 05:00 PM
Worst porn ever..BTW, the image you say is good, that's a screen capture not a sample from some other copier..Have you tried running the screen calibrations in the driver?

This, the correct one is a screenshot of the printing software, which would be the black and white tone that doctors approve.


The image below is the impression of the equipment that comes out green in the composite black.


When I change it to pure black, the image that has to have the black background filled comes out with flaws in gray, this is not approved by doctors.


Is there any software that does color curve calibration like Okidata's PSGAMMA? I tried to use COLOR CENTRO but it´s just for PRO Printers.

48673

dscmanga
03-22-2021, 06:46 PM
Good afternoon. I have already performed all the equipment calibrations.


I believe that a fine adjustment is missing, I have also tried the adjustment by the PLC driver but it does not correct the problem with the hue.


Is there any software that does color curve adjustment other than Color Centro? The color centro does not fit this equipment.

48674

mojorolla
03-22-2021, 09:14 PM
What you see on the screen is RGB, 20 million colors possible; a printer is CMYK, only slightly over 2 million colors possible. In other words, you can get close but not always the same.
You have a few more options with PS driver than PCL (see screenshots below). From what I can see, its not so much a pure black issue as a color rendering one. A yellow usually does turn greenish when the gamuts don't jive. I would also be curious to know the file type and the software its coming from....
48677 48678 48679


:)

emujo2
03-22-2021, 10:00 PM
Good afternoon. I have already performed all the equipment calibrations.


I believe that a fine adjustment is missing, I have also tried the adjustment by the PLC driver but it does not correct the problem with the hue.


Is there any software that does color curve adjustment other than Color Centro? The color centro does not fit this equipment.

48674

Equipment calibration will do you no good, there is a color gamut that you cannot get outside of..have you ran the color mgmnt tool within the driver? This is where you can assign monitor ICC profiles and more closely match what you see on your screen to what the driver can output, but if you are trying to get monitor bright white to look like printer white the best you can get is the brightness of the paper, unless you have a system that can lay down white ink. E

dscmanga
03-23-2021, 12:15 PM
Equipment calibration will do you no good, there is a color gamut that you cannot get outside of..have you ran the color mgmnt tool within the driver? This is where you can assign monitor ICC profiles and more closely match what you see on your screen to what the driver can output, but if you are trying to get monitor bright white to look like printer white the best you can get is the brightness of the paper, unless you have a system that can lay down white ink. E


Hi emujo2, I'm just looking for software that can do this calibration. I found only Color Centro but it doesn't recognize my equipment, it is only for PRO machines.

Where do I get this mgmnt tool? Would it be a management tool?


Where can I find it?


: D

dscmanga
03-23-2021, 12:45 PM
What you see on the screen is RGB, 20 million colors possible; a printer is CMYK, only slightly over 2 million colors possible. In other words, you can get close but not always the same.
You have a few more options with PS driver than PCL (see screenshots below). From what I can see, its not so much a pure black issue as a color rendering one. A yellow usually does turn greenish when the gamuts don't jive. I would also be curious to know the file type and the software its coming from....
48677 48678 48679


:)


mojorolla is basically what you said.
With the MDI exams, we leave it as close to the screen as possible, the biggest difficulty is that the black needs to be 100% filled to make the exam stand out. And when it is an ultrasound, for example, the exam needs to be in white and it turns bluish when it is in composite black, while in pure black the black in the background is grayish.


So I need to find the middle ground between the black background and the tone of the exam. This is the difficulty.


On the OKI C911 I can do without problems adjusting the color curves, lighter, darker, more blue and so on. But at konica I didn't find any software to make this adjustment.

emujo2
03-23-2021, 02:37 PM
Hi emujo2, I'm just looking for software that can do this calibration. I found only Color Centro but it doesn't recognize my equipment, it is only for PRO machines.

Where do I get this mgmnt tool? Would it be a management tool?


Where can I find it?


: D

This is part of the print driver..Properties/color management..You also need to to the machine calibrations with the brightest white paper you can find. have you tried using the dropdown for Web images in color quality? I just noticed this option has been removed in the I series, might still be available in the C287. E

mojorolla
03-23-2021, 02:49 PM
Take the red pill and see how far down the rabbit hole goes:
48686


:)

Walterj
03-23-2021, 04:34 PM
Good afternoon. I have already performed all the equipment calibrations.


I believe that a fine adjustment is missing, I have also tried the adjustment by the PLC driver but it does not correct the problem with the hue.


Is there any software that does color curve adjustment other than Color Centro? The color centro does not fit this equipment.

48674


It would be advisable to use the PCL driver and adjust brightness, contrast and saturation, all this is within the quality adjustment option.
If you want to use the PS controller you have to activate the PS designer option first.
Now if I am not mistaken, there are other programs that are precisely to print these x-rays on this type of paper.
You would have to search, if I find something I will send it to you.

GeraldCruz
09-18-2023, 12:22 PM
Medical images play a pivotal role in modern healthcare. They provide invaluable insights into the human body's inner workings, aiding in diagnosis, treatment, and monitoring of various medical conditions. These images encompass a wide spectrum, from X-rays and MRIs to ultrasounds and CT scans, each offering a unique perspective on different anatomical structures and pathologies. One crucial aspect of medical imaging is the use of surgical mask images (https://depositphotos.com/photos/surgical-mask.html). These images showcase the importance of infection control in healthcare settings. Surgical masks, worn by medical professionals during procedures, protect both patients and healthcare workers from potential infections. By examining surgical mask images, medical experts can evaluate mask placement, fit, and hygiene compliance, ensuring optimal protection. In the age of digitalization, medical images are not only enhancing diagnosis accuracy but also enabling telemedicine, remote consultations, and data-driven research. They are a cornerstone of modern medicine, enabling healthcare professionals to provide more precise and effective care.

emujo2
09-18-2023, 03:27 PM
Medical images play a pivotal role in modern healthcare. They provide invaluable insights into the human body's inner workings, aiding in diagnosis, treatment, and monitoring of various medical conditions. These images encompass a wide spectrum, from X-rays and MRIs to ultrasounds and CT scans, each offering a unique perspective on different anatomical structures and pathologies. One crucial aspect of medical imaging is the use of surgical mask images (https://depositphotos.com/photos/surgical-mask.html). These images showcase the importance of infection control in healthcare settings. Surgical masks, worn by medical professionals during procedures, protect both patients and healthcare workers from potential infections. By examining surgical mask images, medical experts can evaluate mask placement, fit, and hygiene compliance, ensuring optimal protection. In the age of digitalization, medical images are not only enhancing diagnosis accuracy but also enabling telemedicine, remote consultations, and data-driven research. They are a cornerstone of modern medicine, enabling healthcare professionals to provide more precise and effective care.


You're a little late to the party..Do you have a resolution to the issue (over 2 1/2 years old) or are you selling something??

Synthohol
09-18-2023, 04:23 PM
dude, thats not a real person, thats skynet.

tsbservice
09-18-2023, 04:29 PM
dude, thats not a real person, thats skynet.
We have here one real person @skynet :D ... but agree with U, I never reply with quote on such posts that just makes them a bit legitimate whereas they are NOT.

Synthohol
09-18-2023, 05:40 PM
We have here one real person @skynet :D

yeah, haha. the last time i made the reference skynet popped in the thread and had a chuckle i imagine.

Custom Search