PDA

View Full Version : Sharp AL-1540CS L-1 error code


Custom Search


Cheeto
10-27-2006, 06:32 AM
Not a sharp tech, whats the L-1 code for?

Project Warder
10-27-2006, 03:34 PM
Uhm, i'm not too sure on it, but i'm pretty sure it has to do with the laser unit, or it's connections. I'll have a look and see if i can find a manual anywhere for it, although i've only ever worked on one AL series machine so far. If no luck, i'll see if i can find out from Sharp on Monday. We are a service dealer, so I should be able to find out. :)

Actually, come to think of it, i'm not entirely sure that model is here in Australia. Hmm, if it is anything like the AL-1220 (although that one is Colour ?) then I might be able to relate the code from that. Hmm, not sure. I think i spoke too soon! Hahah, i'll still see what I can dig up on it, or even just generally the error code itself.

Good luck.

tonerdude
10-27-2006, 06:06 PM
You have a scanner problem - didn't leave or come back to home, scan overload or cable off or drive problem. - Good luck

kiat
11-29-2006, 09:58 AM
L1 00 Feeding is not completed
within the specified time
after starting feeding.
(The scan head locking
switch is locked)
1.unlock Scanner unit
2. chang connecter
Scanner unit
good luck
SOMKIAT_SHARP_SERVICE@HOTMAIL.COM
fr..technic sharp in thailand

brade
01-07-2007, 02:13 AM
on the left side of the copier, under the scanner, there is a clear plastic dial that locks the scanner in to place for secure transit when moving. turn it to unlock the scanner

Custom Search