PDA

View Full Version : Error Code C-0104 in BIZ PRO 1100


Custom Search


Shinigami
03-26-2021, 12:11 PM
hello ,

can you please help me in this case ,
i have the error code in 1100, new machine , i switch betwen the motors, but without resolt

blackcat4866
03-27-2021, 12:11 AM
The vertical path motor typically takes out the ICP on the PRCB.
=^..^=

blackcat4866
03-27-2021, 12:14 AM
You'll want to replace the original vertical path motor and PRCB at the same time. You may also have blown another ICP by swapping positions of the motors. =^..^=

Custom Search