View Full Version : Bizhub C280 fuser belt
Lakatom
04-26-2021, 06:01 AM
Hello there,
Why stay previous print on fuser belt? Clean again after 5-6 blank pages prints.
Thanks in advance.
Best regards,
Tom.
Toxic
04-26-2021, 02:33 PM
Provide some more details...
Machine counter, parts consumable lifes...
On what media problem occurs?
Did you make appropriate settings for paper weight in printer driver?
Photo sample could be helpful.
copier addict
04-26-2021, 09:19 PM
Hello there,
Why stay previous print on fuser belt? Clean again after 5-6 blank pages prints.
Thanks in advance.
Best regards,
Tom.
Replace fuser
Synthohol
04-26-2021, 10:28 PM
and stop using aftermarket dirt-in-a-bottle toner if thats what its using.
blazebusiness
04-30-2021, 03:45 PM
Hello there,
Why stay previous print on fuser belt? Clean again after 5-6 blank pages prints.
Thanks in advance.
Best regards,
Tom.
The formulation in the generic toners is a big culprit with symptoms like that. Stop using the compatible toners if you are using them. The modern Konica fusers have nothing like the fuser cleaning mechanisms of past machines. They depend heavily on the much higher wax content and melting point specs in the new toner formulations to put out clean prints.
The other possibility is that the fuser unit is way past it's life and you need a new fuser. What's the meter on that copier?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.