PDA

View Full Version : Getting this black deposit bottom of prints


Custom Search


positiveg
05-11-2021, 05:46 PM
Good day getting this from my C454
Not sure where it's coming from or what's causing it.
Please assist got these booklets to finish up thanks https://uploads.tapatalk-cdn.com/20210511/6d96de44d06dd1abdc19f297ed5c2f26.jpg

Sent from my SM-G955F using Tapatalk

copier addict
05-11-2021, 05:51 PM
Good day getting this from my C454
Not sure where it's coming from or what's causing it.
Please assist got these booklets to finish up thanks https://uploads.tapatalk-cdn.com/20210511/6d96de44d06dd1abdc19f297ed5c2f26.jpg

Sent from my SM-G955F using Tapatalk


Take the drum apart and clean the grid. If that doesn't do it you will likely need to replace the dev unit. Check life counts and replace any drums that are over yield.

Phil B.
05-11-2021, 06:00 PM
Good day getting this from my C454
Not sure where it's coming from or what's causing it.
Please assist got these booklets to finish up thanks https://uploads.tapatalk-cdn.com/20210511/6d96de44d06dd1abdc19f297ed5c2f26.jpg

Sent from my SM-G955F using Tapatalk


it looks like drum issue to me.

i take it the paper feed is LEF... have you tried running it SEF that should remove remove the defect from the print.

what are the page counts on drum/dev... also take a look at the ITB for a like smear. Do a stop test to see if it's on he belt

tulintron
05-11-2021, 06:01 PM
Good day getting this from my C454
Not sure where it's coming from or what's causing it.
Please assist got these booklets to finish up thanks https://uploads.tapatalk-cdn.com/20210511/6d96de44d06dd1abdc19f297ed5c2f26.jpg

Sent from my SM-G955F using TapatalkDeveloper and drum are in contact for some reason. Check DU and UI

positiveg
05-11-2021, 06:05 PM
Ok cool will check the SEF/LEF and go from there.
Then will also check the IBT. And get back to you.
Will get yoy the numbers on the drums as well thanks

Sent from my SM-G955F using Tapatalk

tsbservice
05-11-2021, 07:37 PM
Good day getting this from my C454
Not sure where it's coming from or what's causing it.
Please assist got these booklets to finish up thanks https://uploads.tapatalk-cdn.com/20210511/6d96de44d06dd1abdc19f297ed5c2f26.jpg

Sent from my SM-G955F using Tapatalk

This isn't right image to post. We need separation go in SM and print CMYK halftones. Then if all 4 colors are affected it's ITB. If only single color is affected you will know where to start.

Phil B.
05-11-2021, 07:51 PM
This isn't right image to post. We need separation go in SM and print CMYK halftones. Then if all 4 colors are affected it's ITB. If only single color is affected you will know where to start.

well brother I agree but I work with what I'm given.

mojorolla
05-11-2021, 07:52 PM
Ok cool will check the SEF/LEF and go from there.
Then will also check the IBT. And get back to you.
Will get yoy the numbers on the drums as well thanks

Sent from my SM-G955F using Tapatalk
Wait a minute, this is a booklet; it can only SEF.


:)

Phil B.
05-11-2021, 08:04 PM
Wait a minute, this is a booklet; it can only SEF.


:)

from the look of the smears I don't agree.

tsbservice
05-11-2021, 08:18 PM
well brother I agree but I work with what I'm given.

Completely agree Phil.


Wait a minute, this is a booklet; it can only SEF.


:)

Completely agree mojorolla.

mojorolla
05-11-2021, 08:18 PM
from the look of the smears I don't agree.

Go back to trolling Phil, that's the dumbest shit you ever posted, and that's saying a lot.

EDIT: Hey Phil, thanks for the downvote. I gave you one too for shit advice.

:)

positiveg
05-11-2021, 10:06 PM
Phil made an error.
But anyway seems like the IBT belt did have some smears on it. So was right there.
These are the numbers on the consumables. https://uploads.tapatalk-cdn.com/20210511/dd0b2072e5c8310c98a80a2e011b3a9a.jpghttps://uploads.tapatalk-cdn.com/20210511/ef4154a15931963709a77e0cf6837e5f.jpg

Sent from my SM-G955F using Tapatalk

Synthohol
05-11-2021, 10:10 PM
if its not the drum/dev a clogged waste port from the belt is my next thing to inspect.
its a little bit of a pain to remove and clean but can be done in 15 min. (on the 4 series at least)
the port from the belt to the WTB, not the belt cleaning port on the belt itself.

Phil B.
05-11-2021, 10:18 PM
Ok cool will check the SEF/LEF and go from there.
Then will also check the IBT. And get back to you.
Will get yoy the numbers on the drums as well thanks

Sent from my SM-G955F using Tapatalk

how big is the finished product?

is it folded?

what is the size paper you are using ?

positiveg
05-11-2021, 11:08 PM
how big is the finished product?

is it folded?

what is the size paper you are using ?11*17 folded. To me it also felt like there was a li'l back up going to the waste toner cartridge. But I ran a print after ans it's good. This is 11*17https://uploads.tapatalk-cdn.com/20210511/8c86be7e63dead78a50e892803b8d03d.jpg

Sent from my SM-G955F using Tapatalk

positiveg
05-11-2021, 11:11 PM
11*17 folded. To me it also felt like there was a li'l back up going to the waste toner cartridge. But I ran a print after ans it's good. This is 11*17https://uploads.tapatalk-cdn.com/20210511/8c86be7e63dead78a50e892803b8d03d.jpg

Sent from my SM-G955F using TapatalkAlso somethung to add when I pulled the waste toner out. It was heavy but the glass cup like where you can monitor it is empty

Sent from my SM-G955F using Tapatalk

blackcat4866
05-11-2021, 11:22 PM
It's really common for the waste bottle to fill unevenly on machines that don't do a lot of color. =^..^=

mojorolla
05-11-2021, 11:43 PM
how big is the finished product?

is it folded?

what is the size paper you are using ?

Jesus Christ Phil why didn't you ask these questions at the beginning?

Are you a real tech or just play one Monday through Friday ?

Maybe if you contributed sound advice or click the contribute button, people would be willing to help you.

You have too may vowels in your name, have a downvote !

Sound familiar.....


:)

Phil B.
05-12-2021, 12:04 AM
Jesus Christ Phil why didn't you ask these questions at the beginning?

Are you a real tech or just play one Monday through Friday ?

Maybe if you contributed sound advice or click the contribute button, people would be willing to help you.

You have too may vowels in your name, have a downvote !

Sound familiar.....


:)

why didn't you ask those questions...

I admit I'm not Jesus Christ I AM HUMAN Yes I make mistakes..

are you fucking PERFECT?

you accuse me of being a TROLL have you fucking looked in the mirror lately

too many vowels? what are we playing Wheel of Fortune?

with all your thousands of post I would think you would have a higher rep point standing .....

now can we drop the animosity ? I (until now) thought you were a decent enough of a guy.. guy I was wrong about you... just wish I could remove all the likes and thanks I gave you.

you call yourself the:
Occupation:Hero of the Stupid

and started in the industry in 2000

i started in 1987 working off my kitchen table.

Give a guy a fucking break seems I do contribute with my tid bits of knowledge AND my money (see the Badge?)

where is your badge? 1894 posts rep points 70

granted I do post in R&R forums but am am STILL active in the tech forums... yes I occasionally make mistakes ..DON'T YOU?


E.O.S.

positiveg
05-12-2021, 12:47 AM
why didn't you ask those questions...

I admit I'm not Jesus Christ I AM HUMAN Yes I make mistakes..

are you fucking PERFECT?

you accuse me of being a TROLL have you fucking looked in the mirror lately

too many vowels? what are we playing Wheel of Fortune?

with all your thousands of post I would think you would have a higher rep point standing .....

now can we drop the animosity ? I (until now) thought you were a decent enough of a guy.. guy I was wrong about you... just wish I could remove all the likes and thanks I gave you.

you call yourself the:
Occupation:Hero of the Stupid

and started in the industry in 2000

i started in 1987 working off my kitchen table.

Give a guy a fucking break seems I do contribute with my tid bits of knowledge AND my money (see the Badge?)

where is your badge? 1894 posts rep points 70

granted I do post in R&R forums but am am STILL active in the tech forums... yes I occasionally make mistakes ..DON'T YOU?


E.O.S.Thanks. There's actually no need for the attacks. I knew you made a mistake. And you have assisted me cou tless times on here so I know your advice is quite sound Phil. Thanks

Sent from my SM-G955F using Tapatalk

positiveg
05-12-2021, 12:49 AM
It's really common for the waste bottle to fill unevenly on machines that don't do a lot of color. =^..^=But we do a ridiculous amount of colour. We barely print back and white. But I see what yiur saying. If the line comes back I'll ask the ladies to take out the cartridge give it a slight tap make sure there isn't anything blocking in there. Thanks

Sent from my SM-G955F using Tapatalk

rrrohan
05-12-2021, 12:53 AM
WTB probably full of developer if it not full but heavy

Phil B.
05-12-2021, 01:17 AM
Thanks. There's actually no need for the attacks. I knew you made a mistake. And you have assisted me cou tless times on here so I know your advice is quite sound Phil. Thanks

Sent from my SM-G955F using TapatalkThanks for having my six.
I'm an old head that doesn't put up with personal attacks.
Sorry for mudding the waters.
I digress.

Sent from my SM-G960U using Tapatalk

positiveg
05-12-2021, 01:25 AM
It's cool man. I knew I might still be a newbie here. But I've never seen anything personal on here. Maybe folks telling folks to make sure they know what they are talking about before they speak etc. But no type of trolling.
But yoy good man. All the contributions here and on my other posts from you and others have been too notch.


Sent from my SM-G955F using Tapatalk

Phil B.
05-12-2021, 01:36 AM
It's cool man. I knew I might still be a newbie here. But I've never seen anything personal on here. Maybe folks telling folks to make sure they know what they are talking about before they speak etc. But no type of trolling.
But yoy good man. All the contributions here and on my other posts from you and others have been too notch.


Sent from my SM-G955F using TapatalkThanks again brother. I try to help when I can but I too make mistakes.
Have a great one.. peace.

Sent from my SM-G960U using Tapatalk

positiveg
05-12-2021, 01:38 AM
Yea man. Bless

Sent from my SM-G955F using Tapatalk

rrrohan
05-12-2021, 03:35 PM
Yea man. Bless

Sent from my SM-G955F using Tapatalk

get a room u too

tulintron
05-12-2021, 06:08 PM
why didn't you ask those questions...

I admit I'm not Jesus Christ I AM HUMAN Yes I make mistakes..

are you fucking PERFECT?

you accuse me of being a TROLL have you fucking looked in the mirror lately

too many vowels? what are we playing Wheel of Fortune?

with all your thousands of post I would think you would have a higher rep point standing .....

now can we drop the animosity ? I (until now) thought you were a decent enough of a guy.. guy I was wrong about you... just wish I could remove all the likes and thanks I gave you.

you call yourself the:
Occupation:Hero of the Stupid

and started in the industry in 2000

i started in 1987 working off my kitchen table.

Give a guy a fucking break seems I do contribute with my tid bits of knowledge AND my money (see the Badge?)

where is your badge? 1894 posts rep points 70

granted I do post in R&R forums but am am STILL active in the tech forums... yes I occasionally make mistakes ..DON'T YOU?


E.O.S.You have also helped me a lot. When you say something, if I didn't do it, I try to do it. You and many others on this forum are confident. Believe me. Mistakes? Everyone makes mistakes. Exalted are those who recognize. Relax. You are a great man!

Custom Search