PDA

View Full Version : C6100 P/N for wheels


Custom Search


reckless
05-25-2021, 08:31 PM
Can someone help me figure out the part numbers for the wheels underneath the Konica Minolta C6100? I can't find it in the service manual.

Phil B.
05-25-2021, 09:06 PM
Can someone help me figure out the part numbers for the wheels underneath the Konica Minolta C6100? I can't find it in the service manual.

part numbers are found in the PARTS MANUAL.

reckless
05-25-2021, 10:17 PM
I have the quick manual and service manual. Is there a third parts manual? Forgive my ignorance as I am new to this.

Also, wouldn't same part be used across ALL accuriopress machines? The little wheels underneath main engine?

Phil B.
05-25-2021, 10:26 PM
I have the quick manual and service manual. Is there a third parts manual? Forgive my ignorance as I am new to this.

Also, wouldn't same part be used across ALL accuriopress machines? The little wheels underneath main engine?

might help if you posted pictures of the little wheels since you don't know the NAME of the 'wheels'.

no not all parts are used across all lines.. usually different parts for different speed machines

Synthohol
05-26-2021, 12:07 AM
i think he means the ones that support the machine.
front and back are different #s

reckless
05-26-2021, 12:14 AM
4925749258

Perfect! Where did you get this information? I searched service manual and didn't see it.

I googled and found the wheels are $70 from a polish website. Is there a good dealer/aftermarket place to buy these wheels?

The diagram shows 2 wheels my machine has 4. Maybe I missed the other two? I need to replace 2 wheels.

rrrohan
05-26-2021, 01:02 AM
Might be quicker to just go to a decent hardware store and buy some generic ones

But I guess you'd have to then do all 4 plus any on finisher and LU to be sure they are same height. Yeah maybe just get genuine ones [emoji3526]

Phil B.
05-26-2021, 01:13 AM
i think he means the ones that support the machine.
front and back are different #s

for so,e reason I can't open your attachment...

your talking about the cabinet wheel? or under the whole machine?

ok I couldn't gather that from his 'explanation'

thanks brother.

Phil B.
05-26-2021, 01:15 AM
4925749258

Perfect! Where did you get this information? I searched service manual and didn't see it.

I googled and found the wheels are $70 from a polish website. Is there a good dealer/aftermarket place to buy these wheels?

The diagram shows 2 wheels my machine has 4. Maybe I missed the other two? I need to replace 2 wheels.


I always called them "casters"

40yearsplus
05-26-2021, 01:34 AM
Ill ask my work Associate tomorrow. There is a Company in Mass. where they are very helpful and can get you most any Konica part you want we have used.

We also got the casters.

Also you can call a machine wholesaler and ask them if they have any from trash units they have and you can pay for them.

Synthohol
05-26-2021, 03:52 AM
harbor freight, home depot, lots of places to get new castors.
even the bottom of a dolly has good castors.
better yet, grainger.
castor wheel heavy duty products - Grainger Industrial Supply
i PM'd you the right pages..
(https://www.grainger.com/search/material-handling/transporting/casters-wheels/casters/plate-casters/standard-plate-casters?attrs=Wheel+Dia.%7C3+1%2F4+in&filters=attrs&searchQuery=castor+wheel+heavy+duty&sst=4)

Phil B.
05-26-2021, 04:18 AM
harbor freight, home depot, lots of places to get new castors.
even the bottom of a dolly has good castors.
better yet, grainger.
castor wheel heavy duty products - Grainger Industrial Supply
i PM'd you the right pages..
(https://www.grainger.com/search/material-handling/transporting/casters-wheels/casters/plate-casters/standard-plate-casters?attrs=Wheel+Dia.%7C3+1%2F4+in&filters=attrs&searchQuery=castor+wheel+heavy+duty&sst=4)

Synth YOU are da man!

methogod
05-26-2021, 09:08 AM
sign up with ACM, they can order koinca parts pretty good prices. that needs to be level, so I wouldn't use an aftermarket caster.

reckless
05-26-2021, 12:05 PM
What is ACM?

Nvm, I googled and found them. Thanks for the advice, will order from them. I agree castors need to be same to perfectly level.

reckless
05-26-2021, 12:08 PM
harbor freight, home depot, lots of places to get new castors.
even the bottom of a dolly has good castors.
better yet, grainger.
castor wheel heavy duty products - Grainger Industrial Supply
i PM'd you the right pages..
(https://www.grainger.com/search/material-handling/transporting/casters-wheels/casters/plate-casters/standard-plate-casters?attrs=Wheel+Dia.%7C3+1%2F4+in&filters=attrs&searchQuery=castor+wheel+heavy+duty&sst=4)

thanks a MILLION! I needed this. Hoping to self service this machine but dont plan on using any finishers, hoping that will make less points of failure.

40yearsplus
05-26-2021, 02:54 PM
Nice work All !

I'm posting this for all who need in the future also said i would earlier.

https://www.acmtech.com/ I deal with the Hadley Mass. location and the lady there in charge of parts really goes out of her way for you and is very polite. Donna Sullivan

Precision roller has some for limited models Konica Minolta 4061-1010-00 (4061101000) Caster (https://www.precisionroller.com/4061-1010-00-for-konica-minolta/details_pn_84783.html) (details) (https://www.precisionroller.com/4061-1010-00-for-konica-minolta/details_pn_84783.html)Genuine Konica Minolta Part.


Konica Minolta 4061-1010-00 (4061101000) Caster (https://www.precisionroller.com/4061-1010-00-for-konica-minolta/details_pn_84783.html)




Konica Minolta 4061-1010-00 (4061101000) Caster (https://www.precisionroller.com/4061-1010-00-for-konica-minolta/details_pn_84783.html)




Konica Minolta 4061-1010-00 (4061101000) Caster (https://www.precisionroller.com/4061-1010-00-for-konica-minolta/details_pn_84783.html)

40yearsplus
05-26-2021, 02:55 PM
Nice work All !

I'm posting this for all who need in the future also said i would earlier.

https://www.acmtech.com/ I deal with the Hadley Mass. location and the lady there in charge of parts really goes out of her way for you and is very polite. Donna Sullivan

Precision roller has some for limited models Konica Minolta 4061-1010-00 (4061101000) Caster (https://www.precisionroller.com/4061-1010-00-for-konica-minolta/details_pn_84783.html)(details) (https://www.precisionroller.com/4061-1010-00-for-konica-minolta/details_pn_84783.html)Genuine Konica Minolta Part.

blackcat4866
05-26-2021, 07:06 PM
Hopefully you've got a fork lift nearby to gain access to them. This MFP is not light. =^..^=

reckless
05-26-2021, 09:43 PM
Yes thank you we have fork lifts and pallet jacks and tough workers. Lifting it won't be an issue. After we install them I have to hire a minolta tech to install the machine. I hope we can use the RU-518 in place of a finisher.

I left a message for the ACM rep. The part number I gave her might have been wrong. The 4061-1010-00 is different than what is written in the part manual?

reckless
05-26-2021, 11:30 PM
4925749258

Perfect! Where did you get this information? I searched service manual and didn't see it.

I googled and found the wheels are $70 from a polish website. Is there a good dealer/aftermarket place to buy these wheels?

The diagram shows 2 wheels my machine has 4. Maybe I missed the other two? I need to replace 2 wheels.

These wheels look same to me and are $70 cheaper each. Does anyone have an opinion on this they would like to share?
49262

reckless
06-01-2021, 10:24 PM
Thanks I ordered the cheaper set of wheels and I will let everyone knows how it goes when I receive them.

rrrohan
06-02-2021, 05:49 AM
Yes thank you we have fork lifts and pallet jacks and tough workers. Lifting it won't be an issue. After we install them I have to hire a minolta tech to install the machine. I hope we can use the RU-518 in place of a finisher.

I left a message for the ACM rep. The part number I gave her might have been wrong. The 4061-1010-00 is different than what is written in the part manual?

a relay unit is pointless without the finisher

reckless
06-04-2021, 06:22 PM
Cheap wheels are too small, sending them back and ordering larger more expensive set.

My RU-518 relay unit has an exit tray. Since we are printing double sided 13x19 sheets only I don't think we need a fancy finisher. I could be wrong. I do have a PB-503 Id love to hook up but its a headache.

reckless
06-15-2021, 07:15 PM
Are wheels needed or can we use this?49457

Albonline
06-15-2021, 07:22 PM
yes, alignment and levelness are the considerations here.

Custom Search