C71HC Image Fault

[inutelkamo]

Good Day,

Have you stumbled in this kind of print out?
(Please see attached image)

49506
Its suppose to be Gray, not rainbow.. haha
49507

Look closely on vertical CMY area..

All thoughts and suggestions are highly appreciated.
PS.
DRUM CMY - 5%
Drum K - 98%
Charging - CMYK - 5%
Image Transfer Belt - 155/100 Page life
1 and 2nd Transfers 155/100 Page life
2nd Tranfer Lower 155/100 page life
Developer all between 60%-70%

Still waiting for Belt and Rollers to arrive.

[lartis.aineias]

Good Day,

Have you stumbled in this kind of print out?
(Please see attached image)

49506
Its suppose to be Gray, not rainbow.. haha
49507

Look closely on vertical CMY area..

All thoughts and suggestions are highly appreciated.Classic drum bandings!!! Try to change the dot from 190 to 175 may help
The other solution is to change the drum's

Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk

[inutelkamo]

Classic drum bandings!!! Try to change the dot from 190 to 175 may help
The other solution is to change the drum's

Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk


Thanks for the tips..
Will Change the Dot to 175 on next visit..

and ohh, Drum is still fresh.. At 5%.. Except the the Black Drum.

[lartis.aineias]

I usually have this problem with clients who print few copies.
The drums sit on the blades!

Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk

[tulintron]

You can print the separate colors and measure the distance between the marks. I would shoot drums or developer units.

[inutelkamo]

I usually have this problem with clients who print few copies.
The drums sit on the blades!

Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk

Nice Nice.. Thank You..
Will review the process unit on next visit.

Maybe this,
49519

This drum was fresh from the box, but I cancel the installation of this drum unit when i saw this.
Maybe i didn't notice this on other colors during drum replacement.

Still waiting for the shipment of new DU Units for testing..
Have a good day..

[inutelkamo]

You can print the separate colors and measure the distance between the marks. I would shoot drums or developer units.

Copy!

Will work on this when new DU is already available.

Thanks a lot.

[blackcat4866]

Try these originals:

[inutelkamo]

Try these originals:

Nice, thanks!

Will Update soon..