PDA

View Full Version : 250 colour with flashing orange button???


Custom Search


konikilla
11-29-2008, 09:45 PM
I have a 250 colour with a flashing orange start button. It says ready to copy on the screen and warms up normally. But it won't copy!!!

I've replaced the fixing unit and all the imaging units. I've tried doing various resets in service mode but the machine won't let me do them as I have a flashing red start button????????

Any Ideas!

kmcopier
11-30-2008, 12:58 PM
Hello check if the mechanical counter is connected, and check your sif board this can defective check icp1

redime
11-30-2008, 02:02 PM
Solution ID TAUS0657960EN* Solution Usage
Description

The Start button is flashing amber.

Solution

CAUSE: PWB-SIFfailed.
SOLUTION: Replace PWB-SIF (p/n 4038-0123-03).

Do yourself a favor, head over to Take a bite out of high priced service (http://solutions.ogator.com/)

Download the All Solutions for the models that you repair free of charge - these can save you countless dollars and hours in the field. Best of luck!

Custom Search