PDA

View Full Version : Konica Minolta C368 - asking for admin password


Custom Search


Kenny
08-04-2021, 04:48 PM
Hi guys,

we have a Konica Minolta C368 that asks for the admin password when selecting user settings and selecting the meter count tab,

we have updated firmware of machine, is there a possible software switch to disable this? never had it before.:confused:

emujo2
08-04-2021, 05:01 PM
Always helps to search the site for these keywords...

Try SW switch 200 set to HEX 20

tsbservice
08-04-2021, 05:37 PM
Always helps to search the site for these keywords...

Try SW switch 200 set to HEX 20



Yes it was asked before:
Bizhub C364e Jumps to Admin setting password when you select Utility button (https://www.copytechnet.com/forums/konica-minolta/135135-bizhub-c364e-jumps-admin-setting-password-when-you-select-utility-button.html)
It is good to prevent some type of users making mess with machine settings.

lartis.aineias
08-04-2021, 05:41 PM
12345678

Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk

lartis.aineias
08-04-2021, 05:42 PM
12345678

Στάλθηκε από το AC2003 μου χρησιμοποιώντας TapatalkThis is the admin password 1234567812345678


Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk

Kenny
08-05-2021, 08:54 AM
Always helps to search the site for these keywords...

Try SW switch 200 set to HEX 20




I have tried that SW switch but is still asking for a password when selecting to print a meter count and select user settings

robinsonad86
08-05-2021, 09:53 AM
Konica have launched a tool for checking softswitches available on infohub pretty sure it works on this model. Could be worth having a look at to see if anything else has been changed

tsbservice
08-05-2021, 02:51 PM
I have tried that SW switch but is still asking for a password when selecting to print a meter count and select user settings
Should be 00 not 20.

strider5555
08-05-2021, 04:43 PM
Also check Sw71 should be hex 00.

tsbservice
08-05-2021, 06:10 PM
Also check Sw71 should be hex 00.

+1 on this

Custom Search