View Full Version : bizhub C226 C6756
Hello,
Do anyone have this issue below:
One C226 often showed C6756, first time I tried flat cable but still the same, and fixed by replaced CIS module.
After 4 months the machine showed again, and replaced CIS again.
After 4 months again, today, it display the same code again......
What will cause this happen?
copier tech
08-21-2021, 01:17 PM
Hello,
Do anyone have this issue below:
One C226 often showed C6756, first time I tried flat cable but still the same, and fixed by replaced CIS module.
After 4 months the machine showed again, and replaced CIS again.
After 4 months again, today, it display the same code again......
What will cause this happen?
Could be a firmware bug, what version is it on?
Could be a firmware bug, what version is it on?
Now it's using G00-11
blackcat4866
08-21-2021, 05:47 PM
On the Kyocera Saturn series the second side CIS failures were caused by a cooling fan failure, and subsequent overheating. On the Saturn series it was SOP to change the CIS and fan in the same procedure. Maybe this applies? =^..^=
On the Kyocera Saturn series the second side CIS failures were caused by a cooling fan failure, and subsequent overheating. On the Saturn series it was SOP to change the CIS and fan in the same procedure. Maybe this applies? =^..^=
On bizhub C226, it seems not equipped with fan motor on scanner section.
tsbservice
08-21-2021, 11:41 PM
Update firmware.
I updated the F/W to G00-14, still same, finally fixed it by replaced CIS again.
This is the third time, no idea what would cause CIS damaged......
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.