View Full Version : Konica vs Lexmark
Kenny
08-23-2021, 11:35 AM
Hi guys,
does anyone know the Lexmark equivalent of a Konica Minolta C258 - C658?
tsbservice
08-23-2021, 12:00 PM
Hi guys,
does anyone know the Lexmark equivalent of a Konica Minolta C258 - C658?
First time I hear about that, are you sure they are existing?
copyman
08-23-2021, 12:30 PM
I know a few of the Kon/Min small machines like the Biz 4750 are made by Lexmark. Didn't know they shared bigger models.
mloudy
08-23-2021, 12:56 PM
I would say the Lexmark XC9225, XC9235, XC9245, XC9255 and XC9265.
blackcat4866
08-23-2021, 01:12 PM
I'll confirm that Lex rebadges some mid-range Konica Minoltas. It's disappointing that they load their own Lexmark firmware.
=^..^=
exit148
08-23-2021, 01:54 PM
I don't think Lexmark markets or sells either of these models. (Muratec sells the C258 but not the C658)
occus
08-25-2021, 11:14 AM
I have never heard of it... but of course if you look on the photo the left or the right machine side that is a KM basic...
5002750026
Lexmark CX921
tsbservice
08-25-2021, 02:23 PM
I have never heard of it... but of course if you look on the photo the left or the right machine side that is a KM basic...
5002750026
Lexmark CX921
From the back also...:D
mloudy
08-25-2021, 02:46 PM
From our Lexmark Business Solutions Dealer lineup card. We have not sold any of the non-Lexmark manufactured engines.
50030
drowranger
08-25-2021, 10:39 PM
You can actually use some c458 parts on this (ITB , Fuser, feed rollers ,WTB ) . Drums Devs and toner are chipped. Its running Lexmark software so very limited items on service mode.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.