PDA

View Full Version : Konica vs Lexmark


Custom Search


Kenny
08-23-2021, 12:35 PM
Hi guys,

does anyone know the Lexmark equivalent of a Konica Minolta C258 - C658?

tsbservice
08-23-2021, 01:00 PM
Hi guys,

does anyone know the Lexmark equivalent of a Konica Minolta C258 - C658?
First time I hear about that, are you sure they are existing?

copyman
08-23-2021, 01:30 PM
I know a few of the Kon/Min small machines like the Biz 4750 are made by Lexmark. Didn't know they shared bigger models.

mloudy
08-23-2021, 01:56 PM
I would say the Lexmark XC9225, XC9235, XC9245, XC9255 and XC9265.

blackcat4866
08-23-2021, 02:12 PM
I'll confirm that Lex rebadges some mid-range Konica Minoltas. It's disappointing that they load their own Lexmark firmware.
=^..^=

exit148
08-23-2021, 02:54 PM
I don't think Lexmark markets or sells either of these models. (Muratec sells the C258 but not the C658)

occus
08-25-2021, 12:14 PM
I have never heard of it... but of course if you look on the photo the left or the right machine side that is a KM basic...
5002750026

Lexmark CX921

tsbservice
08-25-2021, 03:23 PM
I have never heard of it... but of course if you look on the photo the left or the right machine side that is a KM basic...
5002750026

Lexmark CX921

From the back also...:D

mloudy
08-25-2021, 03:46 PM
From our Lexmark Business Solutions Dealer lineup card. We have not sold any of the non-Lexmark manufactured engines.
50030

drowranger
08-25-2021, 11:39 PM
You can actually use some c458 parts on this (ITB , Fuser, feed rollers ,WTB ) . Drums Devs and toner are chipped. Its running Lexmark software so very limited items on service mode.

Custom Search