konica c308 slow copier and error c-d011

[enricocopyline]

good evening everyone
I have a copier c308 that starts to go slow then slowly from code c-d011 (hard-disk).
I install the SATA DRIVER and everything works fine for a few months then the problem returns.
I have already changed hard drives but I have not solved the problem. What could it be?

[tsbservice]

See this post:

3 reboots, then will display code it was trying to fix. trouble reset may mode reboot also. i just wait it out then go to service mode. you would have to do a physical then logical format on a new drive .,the 8series acts funny while formatting hdds. logical can take up to 3 retries before it takes.

From:
BH C368 with C-D011 (https://www.copytechnet.com/forums/konica-minolta/159529-bh-c368-c-d011.html)