Konica minolta bizhub C3350 Airprint cant be enabled

[Brejvi]

Hello everyone,
Iam having issue with my KM bizhub C3350, iam trying to enable Airprint. I already set software switch 168 to HEX00, and tried to enable Airprint in network setting, after machine restart airprint is not enabled. I cant enable Bonjour either.
I installed firmware controller fw - A3GN30G0851-899 controller fw - A3GN30GD883-W51 engine fw - A3GN0Y00050G002100 and it still does not work
Do you have any ideos what i should do next?
Thank you

[kingarthur]

You'll probably need the Aiprint activation code from Konicaminolta

[Brejvi]

Okay, thank you. I will contant them.

[Synthohol]

heres a few other solutions to airprint problems.


Problem

AirPrint not working properly after updating to SMB 2.0 firmware.

Solution
CAUSE: Controller firmware requires updating.

SOLUTION: Install firmware version A3GN30GJ8C3-W51 or newer. The latest version firmware is available for download via One Stop Product Support.






Problem
AirPrint (Bonjour) setting is disabled



Solution
CAUSE: Firmware requires updating

SOLUTION: Install the following firmware based on the model. The latest version of firmware, system software or drivers is available via One Stop Product Support.


bizhub C3110; A6DT30GJD01-951
bizhub C3100P: A6DR30GJD01-951
bizhub C3850/3350/3850FS; A3GN30GJ8C3-W51



Problem
PROBLEM: AirPrint button is not available.

Solution
CAUSE: Incorrect software switch settings

SOLUTION: Perform the following procedure:

1. Enter Service Mode
2. Select System 2
3. Select Software Switch Settings
4. Select Sw 13
5. Change setting to HEX 04, press OK and select Fix
6. Cycle the power on the machine and now the AirPrint button should be available to select

[Brejvi]

Thank you very much sir,
Firmware version A3GN30GJ8C3-W51 should solve my problem, but i cant download on KM download center, because their download link is broken somehow. Any ideas where can i download this specific version of firmware?

[kingarthur]

apologies, I thought you were talking about the C3350i, the C3350 is an old piece of kit

[Brejvi]

Never mind, thanks for your effort anyway. :-)

[Brejvi]

Installed controller version A3GN30GJ8C3-W51. And it did not help. Still can't enable bonjour and airprint.

[ionutzd]

Installed controller version A3GN30GJ8C3-W51. And it did not help. Still can't enable bonjour and airprint.

Hi,

where did you get the new firmware? I'm trying to find one since november :(

[copier tech]

Hi,

where did you get the new firmware? I'm trying to find one since november :(

Happy to help.

Printer & Copier Firmware - www.printerfirmware.co.uk (http://www.PrinterFirmware.co.uk)