PDA

View Full Version : Bizhub 458e


Custom Search


antone
10-24-2021, 05:43 PM
Jam code 3003 ...1 or 2 copies out jams and folds entering fuser ! Replaced fuser ect

Sent from my SM-N981U using Tapatalk

tsbservice
10-24-2021, 06:44 PM
I would try new paper exit sensor, spring and flag.
Make sure registration section isn't binding.

Woxner
10-24-2021, 07:52 PM
If the exit sensor does not work replace the clutch on fuser drive or the fuser drive assy.

blackcat4866
10-24-2021, 08:55 PM
That's it right there:

Exit photointerrupter or flag
Exit clutch.

I've changed a lot of both. =^..^=

antone
10-24-2021, 11:50 PM
Fuser drive....must be a tough 2 replace ( ^^) cat

Sent from my SM-N981U using Tapatalk

antone
10-24-2021, 11:52 PM
Think the fuser drive is bad

Sent from my SM-N981U using Tapatalk

blackcat4866
10-25-2021, 12:06 AM
It's similar to the bizhub 554e ... just more things to remove from the rear. I assisted another tech changing the exit clutch a few months ago. 2 hours. =^..^=

rrrohan
10-25-2021, 04:47 AM
It's similar to the bizhub 554e ... just more things to remove from the rear. I assisted another tech changing the exit clutch a few months ago. 2 hours. =^..^=

yeah i always just do the assy

Custom Search