PDA

View Full Version : konica c224e fade on top side


Custom Search


lazymangr
11-04-2021, 12:32 PM
i got a c224e that all prints are fainted all across on the top side on all colors. i attach a pdf with scanned gradation.ignore the distortion of the banding on the scan, its due to a not so clean scanner. the scan gradiation pages are cut in half and rotated together cause its not that obvious so you see the bottom side compared with the top side. there are new drums, new belt and cleaned laser units with the stick. any thoughts?

DOC041121-04112021131144.pdf | DocDroid (https://docdro.id/uUazJi5) the pdf

lazymangr
11-04-2021, 12:42 PM
here are better pics Imgur: The magic of the Internet (https://imgur.com/a/03QDDET)

Gift
11-04-2021, 12:49 PM
clean the polygon motor / mirrors

tsbservice
11-04-2021, 12:51 PM
clean the polygon motor / mirrors

+1

mp752
11-04-2021, 02:41 PM
清潔清潔電機/鏡子
+1
50679

lazymangr
11-05-2021, 01:54 PM
thanks guys! i will check it and come back to you with results!

lazymangr
11-19-2021, 12:31 PM
hi again! it was the polygon motor indeed! a good cleaning and it is good as new! thank you guys!

Custom Search