Dipsw Tray 1 & 2 Thick 3 and Thick 4 enable tab

[byronf]

Hi All,

I am looking for the dipsw that enables the Thick.4 tab for tray 1 & 2 paper settings on E-range or 8 series.

I recently came cross this info on the forum but for the life of it I am unable to find it now that I need it.

Please if anybody can assist..

[byronf]

Hi All,

Last attempt for the request below.

[Synthohol]

It's in the service manual I believe.

Plus why would you want to? Thick ass paper belongs on the bypass.
You are just asking for jamming from the trays but to each their own.

[blackcat4866]

I don't think you're going to find that DIPSW. Tray's #1, #2, #3, #4 are only good up to 256gsm (Thick 3).

You'll have to use the bypass for Thick 4 (257-300gsm). It's on pg C-2, C-3 of you service manual, if you'd like to read it yourself.
=^..^=

[byronf]

Hi,
Yes I know it make no sense, however this requested by the client.

Client has a C554e they recently up graded to C558 and back up C554e. The old C554e has the Thick 4 setting for tray 1 & 2. Now the new devices do not display this tab.

I have compared dipsw list and still had no luck.

[Synthohol]

Even the spec sheet only shows up to 256gsm for all trays except bypass.

[tsbservice]

Hi,
Yes I know it make no sense, however this requested by the client.

Client has a C554e they recently up graded to C558 and back up C554e. The old C554e has the Thick 4 setting for tray 1 & 2. Now the new devices do not display this tab.

I have compared dipsw list and still had no luck.
Soft switch or DIPSw? You can send me saved in Excel S1 file to compare against one of mine C554e.

[byronf]

Even the spec sheet only shows up to 256gsm for all trays except bypass.

This is very helpful for the C558, now I need a resolution for the C554e.
1 down 1 more to go.

[byronf]

Soft switch or DIPSw? You can send me saved in Excel S1 file to compare against one of mine C554e.

I be going through Monday, will export the list.

[tsbservice]

Even the spec sheet only shows up to 256gsm for all trays except bypass.
Synt we already cleared spec values on another hand he hava machine showing Thick 4 even that is outside of recomended range.
It's good to find out the answer.