BH-C-284e with FS-534SD [Archive]

Hansoon

11-18-2021, 05:55 AM

BH-C-284e with FS-534SD
How to force the machine to use 1st upper tray for copies only and the 2nd middle tray for prints only? Now everything, copies and prints are landing in the 2nd middle tray. 1st tray is without use.
Can't find settings for it.

Hans

tsbservice

11-18-2021, 06:08 AM

I think there is engine DIPSW for that.

elmaligno

11-18-2021, 07:05 AM

BH-C-284e with FS-534SD
How to force the machine to use 1st upper tray for copies only and the 2nd middle tray for prints only? Now everything, copies and prints are landing in the 2nd middle tray. 1st tray is without use.
Can't find settings for it.

Hans

You can do this in administrator settings.

rrrohan

11-18-2021, 07:17 AM

Utility
Admin
System settings
Output settings
Output tray settings

Sent from my Pixel 4 XL using Tapatalk

Hansoon

11-18-2021, 04:12 PM

Thanks rrrohan,

that's it!

Problem solved. Can you imagine that I completely overlooked that menu item? I KNEW it should be there and I KNEW where it must be from the older generation machines but somehow I completely overlooked it, though searching for at least half an hour.

Boy, am I really getting THAT much of a fossil......?

Hans