View Full Version : Minolta bizhub c350 error code after power failure
jhanks
12-16-2008, 09:58 PM
C-0001 is the malfunction code I am getting - happened after a power failure in a storm yesterday - can anyone help me???
Thanks in advance
Jason
copytechman
12-17-2008, 12:13 AM
From the source:
C0001 Main Motor turning at abnormal
timing
• The Motor Lock signal remains LOW for a predetermined
continuous period of time while the Motor
remains stationary.
Try the trouble reset switch to reset this one.. otherwise maybe bum motor or controlling board? More likely a power glitch though.
Regards!
A.
jhanks
12-17-2008, 12:15 AM
Where is the trouble reset button?
I have unplugged the machine a few times with no luck
copytechman
12-17-2008, 01:14 AM
Unplugging may not help, trouble reset is under the front cover near the lower front cover hinge, accessed by a small hole in the plastic cover near the hinge, access is from below @ a 45 degree angle down approx. Reset with power on obviously.
Regards!
A.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.