PDA

View Full Version : BH 1100 Slow Printing


Custom Search


splblazer91
11-29-2021, 08:23 PM
They have 2 machines. Only one is messing up. Does it with crossover from my laptop as well. It is slow to print and takes about 30 seconds to pull up the printer preferences. Web Interface is also inaccessible.
Heres what Ive tried: NVRAM rewrite, FW Update(ver 90), Format Controller HDD and 3 different print drivers.

Any ideas before I replace Controller Board?

bsm2
11-30-2021, 01:13 AM
did you try a data clear?
and reset the nic

splblazer91
11-30-2021, 01:57 AM
There arent initialization settings on an 1100 like there are on the office devices. I did the controller hdd format which wipes the network settings though.

bsm2
11-30-2021, 02:07 AM
There arent initialization settings on an 1100 like there are on the office devices. I did the controller hdd format which wipes the network settings though.

try replacing the hhd

BillyCarpenter
11-30-2021, 03:10 AM
Before you replace anything, I would check to make sure that you LAN Interface speed is set to AUTO or whatever setting matches your network...which is most likely Gigabit.

splblazer91
12-01-2021, 05:52 PM
FIXED!
Replaced Controller today with no luck. Tech Support was no help so I started searching KB Articles. Found one for the 8 series. It had me go into the driver and turn off auto obtain settings.(Bi-directional communication) This resolved my problem.

tsbservice
12-01-2021, 07:15 PM
FIXED!
Replaced Controller today with no luck. Tech Support was no help so I started searching KB Articles. Found one for the 8 series. It had me go into the driver and turn off auto obtain settings.(Bi-directional communication) This resolved my problem.

Good find splblazer91! Really shows you the idea behind "better measure twice before cut"

blackcat4866
12-01-2021, 07:28 PM
FIXED!
Replaced Controller today with no luck. Tech Support was no help so I started searching KB Articles. Found one for the 8 series. It had me go into the driver and turn off auto obtain settings.(Bi-directional communication) This resolved my problem.

Thanks for sharing! =^..^=

Custom Search