minolta ep1031 light copies

[kenmbsi]

I have replaced the drum and developer and run the automatic exposure setting F5 and still have very light copies. optics are clean, aperture on mirror # 1 is ok....any ideas???

[deep]

Try the following to resolve your problem:

1. set c2 from 0 to 1
2. set c6 from 0 to 2
3. switch off the machine
4. turn on the machine
5. set c2 back to 0
6. make a copy to check the CQ

If necessary, proceed to set F3 (Manual Exposure) to meet the required CQ, then not forget to run F5 (Auto Exposure).


Hope this can help you!!