PDA

View Full Version : BH-C-284e, not waking up from sleep mode.


Custom Search


Hansoon
12-06-2021, 08:13 AM
BH-C-284e, not waking up from sleep mode.

Machine does not completely wake up from sleep mode. Display is showing two fins but the machine does not continue booting. Only completely switching off/on release this situation, than it works fine until the next sleep mode. I remember that this was an issue in the past discussed here but could not find with the search mode in the panel the reason for this problem. Any other solution than deactivation of the sleep mode? Tried Latest & Greatest "Frimwar" already..... :cool:
It has now A5C10Y0-F000-G20-M1

Hans

Toxic
12-06-2021, 08:58 AM
Try this settings



SM-System 1 -> Sleep ON/OFF Choice Setting

Permit






Admin mode



Low Power Mode Setting

15 min


Sleep Mode Settings
Off


Power Save Settings
Low Power


Power Key Setting
Sub Power Off


Enter Power Save Mode
Normal

D Colour
12-06-2021, 12:30 PM
In addition to Toxic's post...

50999

It advises to turn the weekly timer off and turn off SSDP in network settings.

copyman
12-06-2021, 12:48 PM
We turn off sleep mode on all the "4" series. There was a bulletin about machines not waking up from sleep mode. Machine will still go into energy save mode but not fully to sleep.'

Like other poster wrote you have to go into service mode and "permit" sleep to be turned off in Admin mode.

tsbservice
12-06-2021, 05:44 PM
Just another addon I find it very helpfull especially last reply made by TheOwl.
Bizhub c284 wont print without restarting machine (reposted from Connectivity forum) [Archive] - Copytechnet.com (http://www.copytechnet.com/forums/archive/index.php/t-83288.html)

Cheers guys and keep up the good work!

Custom Search