PDA

View Full Version : Miscellaneous KM 1100 adding a custom "WaterMark/Stamp" to the COPY Function (not print)


Custom Search


Tech_Nerd
12-14-2021, 08:14 PM
Replaced a KM 951 with a KM1100 recently. This customer had created 4 custom "Watermarks" that they could use when making COPIES. It was several years ago that they did this.

Now, on the 1100, they cannot figure out where to create those custom watermarks. Instructions from our Dealer support contact are vague, but essentially they say to create the custom watermark using the Print Driver, then save it as a Custom file (we did that) and copy the watermark file to the Copier (know one knows how to do that though). We've scoured all the documentation we can find, talked to other resources, but cannot figure out to make it work.

We can certainly make ANY watermark when we are printing, that's easy. But they were using Custom WaterMarks when making COPIES.

any ideas?

TIA<

Tech_Nerd

Custom Search