PDA

View Full Version : Miscellaneous Develop 450i Function Code For Airprint 2.1


Custom Search


copytechtrouble
01-27-2022, 10:21 AM
Hello,
I have a develop ineo+ 450i, i have updated to the latest firmware version KJ.

When trying to activate Airprint 2.1 with the function code K9WVG9TXQ8F6D9TRWWPVWYD4M4M8QVC6. I get an error that says, "Failed to Enable. Check the Function Code."

I have also tried the function codes for Konica and Olivetti machines and get the same error.
I cant find anything relating to this issue on the KNova or Olivetti sites. has anyone else encountered this issue?

Thanks

5167651676

Synthohol
01-27-2022, 12:23 PM
Dww3pvrrrtd3kxppwxm8dxkrj6rpcqqv

Gift
01-27-2022, 03:51 PM
Dww3pvrrrtd3kxppwxm8dxkrj6rpcqqv

51678

blackcat4866
01-27-2022, 03:59 PM
51678

Yeah, I get a lot of unsolicited help with my typing. =^..^=

emujo2
01-27-2022, 04:14 PM
Air print is a network protocol, it does not need to be enabled with any kind of function code. What you have is a license code for an LK of some sort. Air print is available out of the box, but might need to be enabled at the PSWC level. E

copyrooks
01-27-2022, 04:21 PM
You might need to change your software switch 25 to hex 20
There's an known issue from konica related to that.

copytechtrouble
01-27-2022, 04:55 PM
Air print is a network protocol, it does not need to be enabled with any kind of function code. What you have is a license code for an LK of some sort. Air print is available out of the box, but might need to be enabled at the PSWC level. E

Airprint needs to be re-enabled with a function code when the latest firmware (KJ) is installed.
Apple have changed the security settings relating to Airprint and the machines need the new function code installed in order to get Airprint to work.
51680

copytechtrouble
01-27-2022, 04:58 PM
Update and FYI,
I got it to work with this function code,

KVX4RPQ7G7FQQRQPC3F6XRWYM2G3TXVV

thank you kind stranger.


Hello,
I have a develop ineo+ 450i, i have updated to the latest firmware version KJ.

When trying to activate Airprint 2.1 with the function code K9WVG9TXQ8F6D9TRWWPVWYD4M4M8QVC6. I get an error that says, "Failed to Enable. Check the Function Code."

I have also tried the function codes for Konica and Olivetti machines and get the same error.
I cant find anything relating to this issue on the KNova or Olivetti sites. has anyone else encountered this issue?

Thanks

5167651676

Synthohol
01-29-2022, 02:25 PM
LOL@keyboard cat!
this is my source ;)

Error
AirPrint is not available with firmware version G00-29 ( bizhub C650i/C550i) G00-79 (bizhub C450i) function version 2.0.

Root Cause
Airprint Activation code has not been entered

Workaround/Fix
New firmware will be released addressing this issue. Until new firmware is made available, please enter the function codes listed below for the corresponding MFP to activate AirPrint.


Model Function Code
bizhub C360i/C300i/C250i J7TRH7GTBYVRPWJWD3K7GPPYBTGXHVWR
bizhub C4050i/C3350i MPGQW6J2GTXWJ2X3BPXRRXP4PPJXQMH7
bizhub C3320i TPB8CTBPKTQ2J3HPRMQ7MMT8RXTYMMVT
bizhub C4000i/C3300i TPB8CTBPKTQ2J3HPRMQ7MMT8RXTYMMVT
bizhub 306i/266i/246i/226i VYRRH8T3XWB2TXB2RPF8VPRXV4CRC6FY
bizhub C650i/C550i/C450i DWW3PVRRRTD3KXPPWXM8DXKRJ6RPCQQV

also...
Problem
AirPrint version 2.1 is not available after installing firmware G00-K8 function version 2.2.

Solution
CAUSE: Certificate is required for Airprint version 2.1

SOLUTION: Please refer to the workaround below.
1. Downgrade function version for G00-K8 to 2.1 by setting software switch 25 to Hex 20
or
2. Downgrade firmware version to G00-J9 function version 2.1
Note: Once KMI (Konica Minolta Incorporated) obtains the certificate for AirPrint2.1, we will provide activation code to use AirPrint2.1.

occus
01-31-2022, 09:46 AM
LOL@keyboard cat!
this is my source ;)

Error
AirPrint is not available with firmware version G00-29 ( bizhub C650i/C550i) G00-79 (bizhub C450i) function version 2.0.

Root Cause
Airprint Activation code has not been entered

Workaround/Fix
New firmware will be released addressing this issue. Until new firmware is made available, please enter the function codes listed below for the corresponding MFP to activate AirPrint.


Model Function Code
bizhub C360i/C300i/C250i J7TRH7GTBYVRPWJWD3K7GPPYBTGXHVWR
bizhub C4050i/C3350i MPGQW6J2GTXWJ2X3BPXRRXP4PPJXQMH7
bizhub C3320i TPB8CTBPKTQ2J3HPRMQ7MMT8RXTYMMVT
bizhub C4000i/C3300i TPB8CTBPKTQ2J3HPRMQ7MMT8RXTYMMVT
bizhub 306i/266i/246i/226i VYRRH8T3XWB2TXB2RPF8VPRXV4CRC6FY
bizhub C650i/C550i/C450i DWW3PVRRRTD3KXPPWXM8DXKRJ6RPCQQV

also...
Problem
AirPrint version 2.1 is not available after installing firmware G00-K8 function version 2.2.

Solution
CAUSE: Certificate is required for Airprint version 2.1

SOLUTION: Please refer to the workaround below.
1. Downgrade function version for G00-K8 to 2.1 by setting software switch 25 to Hex 20
or
2. Downgrade firmware version to G00-J9 function version 2.1
Note: Once KMI (Konica Minolta Incorporated) obtains the certificate for AirPrint2.1, we will provide activation code to use AirPrint2.1.

Update on 19th October 2021
KMI has got the certificate for Airprint 2.1

It is possible to set Function version 2.2 (HEX 30) with the right license code.

ivovb
02-24-2022, 02:43 PM
Procedure that works

1. Upgrade to K8.
2. SS25 > HEX30. Restart.
3. [Utility] > [Administrator] > [Maintenance] > [Authorization function Setting]:[Install License]
Now You have AirPrint v2.1 in Network Menu.
Another way to confirm AirPrint availability - [Utility] - [Device Information] - [Auth. function list display].

BR

Custom Search