PDA

View Full Version : Konica Minolta bizhub 3320 Convert to Lexmark MX310de?


Custom Search


Lx5
02-01-2022, 07:46 AM
Good morning people.

Is there any possible way to convert this printer to it original factor? Tried to do it with firmware, but nothing... Is it actually possible or am i wasting time?

tulintron
02-01-2022, 06:11 PM
Why would you do that?

tsbservice
02-01-2022, 06:13 PM
Good morning people.

Is there any possible way to convert this printer to it original factor? Tried to do it with firmware, but nothing... Is it actually possible or am i wasting time?

Bad idea, old and rotten model.

blackcat4866
02-01-2022, 11:36 PM
I don't think it's a possibility. KM loads its own operating system and firmware. =^..^=

Lx5
02-02-2022, 08:19 AM
I don't think it's a possibility. KM loads its own operating system and firmware. =^..^=

if i try to upgrade it with lexmark firmware, it does upgrade and the version changes to the one that i used. that works also when i downgrade it.

Drivee
02-02-2022, 08:40 AM
I think that this is not possible. What is reason, toners?

Lx5
02-02-2022, 11:05 AM
I think that this is not possible. What is reason, toners?

Yes. they use exactly the same toner but lexmark's are cheaper. the only diffrence is the chip for the recognision.

Toxic
02-02-2022, 11:25 AM
I think it is not worth hassle.
You could simply use some replacement toners, you can find it under 50 euros.
I use them for older 4020 and 4050 and it is working ok.

Custom Search