PDA

View Full Version : BIZHUB 1050


Custom Search


fernan
12-27-2008, 05:51 PM
hello guys,,,
Can anyone help on Konicaminolta BH 1050 frequent jamming when paper is coming out FACE DOWN but no jamming occur DOUBLE SIDED COPY and COPY FACE UP,
i use to set the machine on double sided as a default,
any one has an idea about it ?:)

pepper38_cnd
12-27-2008, 06:08 PM
Did this start after a PM? If so check decurling roller bearings. I made the mistake on my first PM of throwing out one of the bearings on the decurling roller it came out with the roller and i didn't realize there was more than 1 bearing on each end. It caused the symptom you are describing. I learned from my mistake.

fernan
12-28-2008, 07:25 PM
thanks a lot.......:)

Rolandito
12-29-2008, 01:25 AM
maybe u must clean photo sensors, where the sheets is turn over unit,

fernan
12-29-2008, 08:45 PM
i finally solved the problem THANKS

Custom Search