View Full Version : Sd-513 C2070 Limits to 10 pages??
methogod
02-07-2022, 05:59 PM
Everywhere I read sd513 will stitch 20 sheets of shortgrain paper.
Fiery locks me out at 10 sheets at 135/gsm
make no sense to me. 80# gloss text (11x17) should allow 20 sheets to run though it.
cmitch
02-07-2022, 06:53 PM
Everywhere I read sd513 will stitch 20 sheets of shortgrain paper.
Fiery locks me out at 10 sheets at 135/gsm
make no sense to me. 80# gloss text (11x17) should allow 20 sheets to run though it.
#80 Gloss Text is not 135/gsm. It is about 85-90/gsm
methogod
02-07-2022, 07:03 PM
just tried it with 90gsm same error, says 10 sheet max.
tried on on Gloss laser and Plain.
methogod
02-07-2022, 07:18 PM
set to plain it will run 20 sheets.
FML.
need to keep the sd506 now.....
cmitch
02-07-2022, 07:38 PM
set to plain it will run 20 sheets.
FML.
need to keep the sd506 now.....
Will the SD-506 work on the 2070? I would think firmware is too old.
Try lying to machine and set it another notch lower on paper thickness.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.