View Full Version : C454e - Air Print & change disk
xtarabash
02-08-2022, 02:03 PM
Good morning, I replaced the broken record on a Konica C454e Now the AIR PRINT function no longer works How can I recover the machine firmware? As I understand it, AIR PRINT only works with G20-J6 firmware or higher, right?
:( SORRY FOR THE GOOGLE TRANSLATOR :(
Dear, Agostino.
What is a brocken record? Hdd?
copier tech
02-08-2022, 09:45 PM
Good morning, I replaced the broken record on a Konica C454e Now the AIR PRINT function no longer works How can I recover the machine firmware? As I understand it, AIR PRINT only works with G20-J6 firmware or higher, right?
:( SORRY FOR THE GOOGLE TRANSLATOR :(
Dear, Agostino.
Load the latest firmware & set function version 7 with SW 25 HEX 60
Then turn it on in Administrator Settings>Network Settings >AirPrint Settings>ON
Synthohol
02-08-2022, 10:54 PM
PM sent.
Thanks for being a contributor!
Synthohol
02-08-2022, 10:58 PM
Load the latest firmware & set function version 7 with SW 25 HEX 60
Then turn it on in Administrator Settings>Network Settings >AirPrint Settings>ON
or log on their wifi
the mobile device has to be on the same segment of the copiers network, most customers forget that too ;)
Don't forget Soft sw 168 set to hex 05 only then air print will be available in admin option.
xtarabash
02-09-2022, 06:49 PM
What is a brocken record? Hdd?
Yes , i'm sorry but using google traslator :(
copier tech
02-09-2022, 08:59 PM
or log on their wifi
the mobile device has to be on the same segment of the copiers network, most customers forget that too ;)
Yes good point!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.