PDA

View Full Version : Konica 7130 error code F-56-11


Custom Search


dvdasmth
12-29-2008, 09:08 PM
I changed the main board and kept the original memory board. Now I'm getting the F-56-11 code. I understand from the intravia manuel that this is a communication; control board issue.
If anyone can help, it would be greatly appreciated.
Thanks in advance,
David

copytechman
12-29-2008, 11:06 PM
Did you reflash the firmware? Recommended per the service manual.
Regards.
A.

dvdasmth
12-30-2008, 04:52 AM
Dear A,
No, I haven't flashed the firmware. Is this info in the Intravia manuel? I don't have a service manuel for this machine yet.
Thank you for your reply.
dvdasmth

pepper38_cnd
12-30-2008, 10:50 PM
Check you email for a YouSendIt link, everything you need is there, If you have any questions, Ask first.

smiley
12-31-2008, 12:38 AM
Check you email for a YouSendIt link, everything you need is there, If you have any questions, Ask first.
hi friend can you also send me the link please i dont have the manual of this machne also.please.:) this is my mail neil_ivere@yahoo.com.ph thanks

smiley
12-31-2008, 09:55 AM
Check you email for a YouSendIt link, everything you need is there, If you have any questions, Ask first.
thank you soo much got it...:)

Custom Search