PDA

View Full Version : Error Code Error code 33-01 on 758


Custom Search


Ado Mmoloki Moepedi
02-25-2022, 08:41 AM
I have a Konica Minolta Bizhub 758, I copied a 10 original page for 100 copies document in the morning without any problems, now I am trying to do another 100 copies and some papers seem to be a bit crumbled when exiting the finisher some get crumbled up enough to cause a jam and produce the error code 33-01. What might be the cause of this. The error code is 33-01.

Gift
02-25-2022, 08:58 AM
I have a Konica Minolta Bizhub 758, I copied a 10 original page for 100 copies document in the morning without any problems, now I am trying to do another 100 copies and some papers seem to be a bit crumbled when exiting the finisher some get crumbled up enough to cause a jam and produce the error code 33-01. What might be the cause of this. The error code is 33-01.

What do you mean with crumbled? Does it looks like ironed with creases?

Ado Mmoloki Moepedi
02-25-2022, 10:40 AM
What do you mean with crumbled? Does it looks like ironed with creases?

Yes in middle of the paper for those that make it out of the finisher but the one that cause jams are folded up a bit either before or after the Fusing unit.

Gift
02-25-2022, 10:55 AM
OK - I'd probably start checking the fuser and testing a fresh realm of good quality paper against the currently used paper.

Ado Mmoloki Moepedi
02-25-2022, 12:14 PM
OK - I'd probably start checking the fuser and testing a fresh realm of good quality paper against the currently used paper.

The heat roller looks to have taken some beating from what I can see. Tried to upload a short clip but that failed. I think the problem maybe with the fuser as I have tried with fresh paper of better quality.

tsbservice
02-25-2022, 06:18 PM
Are you sure for jam code? Don't have manual handy but can't recall such code on other bizhubs.

Ado Mmoloki Moepedi
02-25-2022, 06:25 PM
Are you sure for jam code? Don't have manual handy but can't recall such code on other bizhubs.

Yes, I also got 33-02 and 33-03 but i think that because of the messed up paper getting jammed up in other places.

Synthohol
02-25-2022, 07:32 PM
Take off the cover on the right side of the duplex.
There is an upper motor that the belt slips off.
I'm sure I have a pic on this site but take off the cover and watch the belt and see if it is slipping off to the left.

tsbservice
02-25-2022, 08:14 PM
Yes, I also got 33-02 and 33-03 but i think that because of the messed up paper getting jammed up in other places.
Can you post scan of Error code list and Consumables life list?

Synthohol
02-25-2022, 08:14 PM
See post #2 from me here....https://www.copytechnet.com/forums/konica-minolta/157002-bizhub-808-a.html#post1768491

Custom Search