View Full Version : boot device not found , konica minolta C 3070l
Hi,
We have been having lots of unexpected power outages and loadshedding. As a result when the power returned displays a black screen " BOOT DEVICE NOT FOUND".
Has anybody had this error in this group.
blackcat4866
02-26-2022, 07:29 PM
I re-loaded the Fiery twice on one such machine. The customer was having some electrical work done in the building and the contractor kept flipping breakers randomly. The Fiery didn't like it a bit. You'll need to get that power issue solved externally.
=^..^=
rrrohan
02-27-2022, 09:48 AM
Im not trained on RIPs but arent they just PC's?
cant you plug a monitor in and enter BIOS to confirm HDD is even detected?
Bonjour ;
c'est la machine ki affiche ce message ;
ya pas de PC
je devait remplacer la carte AOCB qui ete a remplacer ;
par la suite ce message s affiche
Phil B.
02-27-2022, 11:56 PM
Bonjour ;
c'est la machine ki affiche ce message ;
ya pas de PC
je devait remplacer la carte AOCB qui ete a remplacer ;
par la suite ce message s afficheIn English please.
Sent from my SM-G960U using Tapatalk
Hello ;
This is the machine that displays this message;
there is no pc
I had to replace the AOCB card that was replaced;
afterwards this message is poster
Synthohol
02-28-2022, 02:00 PM
did you swap over all the eeproms and ssd from the old OACB?
I place the ecrome of IC and SSD
Synthohol
02-28-2022, 04:16 PM
Will it boot to a firmware stick?
I haven't touched a production machine since the c6000 so I'm sorry for my limited assistance
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.