View Full Version : TN613 use on C452 copier
Hello,
Due to global supply issue, TN413 are out of stock, only have TN613 toner at warehouse.
They would be used on C452 copier? Thank you.
kingarthur
03-03-2022, 04:27 PM
as far as I can remember they both use the same developer, so I guess the toner must be compatible, I think you just need to change the end cap
Mr Broots
03-11-2022, 03:57 AM
Yes, for sure. Just swap the caps of break the fins on the 613 cap. You'll need a chip, or if you swap caps it will just read low but won't stop the machine. You can also use 711, 712, 618, 713 although it's a bit more involved because you have to swap the rear indexer, since the 711, 618, 712, 713 are all different
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.