Bizhub 363 blur printing/copying in the morning

[KM7155]

Dear guys,
BH363 printing and copying blur in the morning. after few hours it will back to normal.
it will happen again the next morning. i have changed the IU set, problem still there.
any advise will be much appreciated.


cheers...

[copyman]

Dear guys,
BH363 printing and copying blur in the morning. after few hours it will back to normal.
it will happen again the next morning. i have changed the IU set, problem still there.
any advise will be much appreciated.


cheers...

How cold does it get overnight? Or is copier located in a humid environment that air condition is off at night and turned on in morning?

These are only thing I can think of at the moment that makes sense.

If anything else comes to mind will post later.

Another thing comes to mind. Is the copier located near a window that morning sun shines on it?

[blackcat4866]

I agree.

Samples would be nice:
=^..^=

[KM7155]

How cold does it get overnight? Or is copier located in a humid environment that air condition is off at night and turned on in morning?

These are only thing I can think of at the moment that makes sense.

If anything else comes to mind will post later.

Another thing comes to mind. Is the copier located near a window that morning sun shines on it?


Thanks mate for the reply.
Im in Asia, so the night will not be cold, and yes, the office
A bit humid, but the machine running fine for more than 1 year
Already, this problem just happen recently.
Will get the sample and post here.

[tsbservice]

+1 on environmental. Personally I would check/clean/replace all filters and this model have a plenty - ozone, toner, developer filters etc.