View Full Version : Bizhub 363 blur printing/copying in the morning
KM7155
03-05-2022, 12:46 PM
Dear guys,
BH363 printing and copying blur in the morning. after few hours it will back to normal.
it will happen again the next morning. i have changed the IU set, problem still there.
any advise will be much appreciated.
cheers...
copyman
03-05-2022, 02:25 PM
Dear guys,
BH363 printing and copying blur in the morning. after few hours it will back to normal.
it will happen again the next morning. i have changed the IU set, problem still there.
any advise will be much appreciated.
cheers...
How cold does it get overnight? Or is copier located in a humid environment that air condition is off at night and turned on in morning?
These are only thing I can think of at the moment that makes sense.
If anything else comes to mind will post later.
Another thing comes to mind. Is the copier located near a window that morning sun shines on it?
blackcat4866
03-05-2022, 02:49 PM
I agree.
Samples would be nice:
=^..^=
KM7155
03-06-2022, 01:52 PM
How cold does it get overnight? Or is copier located in a humid environment that air condition is off at night and turned on in morning?
These are only thing I can think of at the moment that makes sense.
If anything else comes to mind will post later.
Another thing comes to mind. Is the copier located near a window that morning sun shines on it?
Thanks mate for the reply.
Im in Asia, so the night will not be cold, and yes, the office
A bit humid, but the machine running fine for more than 1 year
Already, this problem just happen recently.
Will get the sample and post here.
tsbservice
03-06-2022, 02:22 PM
+1 on environmental. Personally I would check/clean/replace all filters and this model have a plenty - ozone, toner, developer filters etc.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.