PDA

View Full Version : Miscellaneous Workaround for "Data size too large" error


Custom Search


etroll44
03-16-2022, 08:46 PM
Hello, not really a question, but sharing a workaround I found on my printer. I didn't find this problem anywhere else on the interwebs, and this seemed the best place to contribute my solution.

When printing a large page size (11.692"W, 18.7"L) to my bizhub 368e, I got an error deletion, detailed as "Data size too large". Seemed odd for a 13kb file... But the fine print shown when selecting my Custom Size in the printing properties had a line about "When you specify the paper size as Width 8.266-11.694inch (210-297mm) and Length 18.002-47.244inch (457.3-1200mm), the custom paper size is used for Banner paper." Found and enabled the setting for Banner Printing, and voila! Prints just fine. Just gotta remember to turn Banner Printing off when this particular job completes :)

blackcat4866
03-16-2022, 10:26 PM
Thanks! Good to know. =^..^=

jamshaidalipak
02-02-2023, 06:34 AM
I used your workaround on my bizhub c360. Thank you.

Custom Search