Jccopy85
04-20-2022, 04:06 PM
First of all, a greeting to all this beautiful community, I have been a photocopier user for more than 10 years in my country Bolivia, unfortunately there are no qualified technicians in my country, for this reason I cannot solve the following problem:
I have several BH Pro 920, and because in one of them the HDD2 of the IC-203 failed, I changed it and formatted it, now the problem is that I don't know the procedure to load the print driver again.
I would be very grateful if you could help me with this problem, I leave an attached image of 2 different machines, one that works normally and the other to which the HDD2 was formatted and the printing languages PS, PCL, etc. are not seen.
53061
I have several BH Pro 920, and because in one of them the HDD2 of the IC-203 failed, I changed it and formatted it, now the problem is that I don't know the procedure to load the print driver again.
I would be very grateful if you could help me with this problem, I leave an attached image of 2 different machines, one that works normally and the other to which the HDD2 was formatted and the printing languages PS, PCL, etc. are not seen.
53061