View Full Version : Error Code Konica Minolta bizhub C368 C-9401
Techman63
04-25-2022, 02:16 PM
Hi dear Everybody !
I hope all are fine.
Hopefully, somebody can you help me.
My C368 has a C-9401 code. I prit out the management list. The machine had earlier sometimes this code and C-9402 too. But since friday the code 9401 is permanently.
I changed the LED Exposure Unit with Flatban Cable, Scanner Drive Board, CCD Unit with cable without succex. I tried to upgrade the firmware, nothing.
Does have anybody idea?
tsbservice
04-25-2022, 02:21 PM
Hi dear Everybody !
I hope all are fine.
Hopefully, somebody can you help me.
My C368 has a C-9401 code. I prit out the management list. The machine had earlier sometimes this code and C-9402 too. But since friday the code 9401 is permanently.
I changed the LED Exposure Unit with Flatban Cable, Scanner Drive Board, CCD Unit with cable without succex. I tried to upgrade the firmware, nothing.
Does have anybody idea?
Does LED unit light at all?
kingarthur
04-25-2022, 03:17 PM
have you carried out a trouble reset after replacing any parts
Techman63
04-26-2022, 10:17 AM
Does LED unit light at all?
Yes, it is.
It is moving in the right home position and in the shading position and light.
Techman63
04-26-2022, 10:18 AM
have you carried out a trouble reset after replacing any parts
Yes I did. With front cover and with trouble reset too.
Techman63
05-16-2022, 12:45 PM
have you carried out a trouble reset after replacing any parts
Hi everybody!
I solve it!!
DC Power Supply has a direct cable contact for the scanner drive PWG, especially a 12V for the CCD Unit. This pin had a contact trouble on the DC Power PWB. Horrible. I have it repaired and all right after that.
Thanks the comments and see you for all.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.