CopierTechofOmens
01-09-2009, 03:21 PM
11" x 17" jamming. Sometimes doesn't pick up, sometimes, stops before the Reg. roller, sometimes in the fuser. Replaced feed/resist rollers. Cleaned all sensors paper path rollers. Tech bulletin's reccomend, the paper take up sensor. Which is on B/O until Feb.:mad: It also cites
deficiency in the feeding system see attached workaround. :( I don't have any attached workaround. Before I replace the whole feed assembly, is there any of you KM masters that may have this additional info.? (and,or) other solution
deficiency in the feeding system see attached workaround. :( I don't have any attached workaround. Before I replace the whole feed assembly, is there any of you KM masters that may have this additional info.? (and,or) other solution