View Full Version : Konica C368 with error C-3425
Tiagocang
05-16-2022, 05:31 PM
hello, got 1 machine with error C3425 i wanna know if i can do something to try to fix this...
i changed the fuser for check dcpu and prcb problems and with new fuser dont pop the error.... the fuser had 150k+-
already changed all thermistors
femaster
05-16-2022, 05:38 PM
Use a VOM to check the continuity on the large white connector. Blue wire is common, probe the two white wires and see if the bulb circuit is intact. Perhaps a bulb gave out, or the thermal "fuse" has popped.
Albonline
05-16-2022, 08:11 PM
hello, got 1 machine with error C3425 i wanna know if i can do something to try to fix this...
i changed the fuser for check dcpu and prcb problems and with new fuser dont pop the error.... the fuser had 150k+-
already changed all thermistors
assuming you in fact cleared the failure?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.