View Full Version : Bizhub c454e gradians problem
mramlawi
06-08-2022, 02:30 PM
Dears ,
its a weird problem, on this machine it make a gradians color start normal from the and start to get lighter on the other side using a4 plain paper also think a4/a3.
by the way the cmyk test is perfect
changed itb,drums,developer,transfer roller on right door stop it before the heater and still the same .
any suggestions please
thanks
mramlawi
06-08-2022, 02:41 PM
Dears ,
its a weird problem, on this machine it make a gradians color start normal from the and start to get lighter on the other side using a4 plain paper also think a4/a3.
by the way the cmyk test is perfect
changed itb,drums,developer,transfer roller on right door stop it before the heater and still the same .
any suggestions please
thanks
as i uploaded the photos to check how it start in a good density from side and how it comes lights on another side
Toxic
06-08-2022, 03:05 PM
Dirty poligon motor...?
Check this topic
C224e Print Quality Issues (Problem & Solution) (https://www.copytechnet.com/forums/konica-minolta/141107-c224e-print-quality-issues-problem-solution.html)
tsbservice
06-08-2022, 04:23 PM
If it's not dirty poly motor mirrors try to push side door while making test print and see if quality change. You may have something bent or door is not latching enough.
mramlawi
06-08-2022, 04:37 PM
Dirty poligon motor...?
Check this topic
C224e Print Quality Issues (Problem & Solution) (https://www.copytechnet.com/forums/konica-minolta/141107-c224e-print-quality-issues-problem-solution.html)
I already clean the laser and still the same
Hansoon
06-09-2022, 05:06 AM
Did you clean not only the slit glass of each color, but also the polygon mirror and others inside the, more or less sealed, box?
Hans
mramlawi
06-09-2022, 04:16 PM
Did you clean not only the slit glass of each color, but also the polygon mirror and others inside the, more or less sealed, box?
Hans
yes sure i remove all the laser and clean the polygon motor nothing change
mramlawi
06-09-2022, 04:18 PM
If it's not dirty poly motor mirrors try to push side door while making test print and see if quality change. You may have something bent or door is not latching enough.
Already pushed the door and nothing change that made me really crazy
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.