PDA

View Full Version : 7020 ribbon on main board


Custom Search


repeatcopiers
01-14-2009, 04:07 PM
Does anyone have a secret to detaching the ribbon on the top of the main board. I've broken the plastic piece on the board before and now I'm gun shy.

kiwitechnician
01-14-2009, 04:39 PM
Unusual :-) , no I am just joking. ,,Plastic fantastic,,

The last possibility is glue it.

Next time press slowly and together with two fingers on both sides.

Luther
01-14-2009, 05:42 PM
Page 3-6 of the service manual ,disassemble/assembly section shows you how to remove it,hope this helps

COPIER DAVE
08-18-2010, 05:54 PM
I know this thread is old but I just found the trick to the 7020 ribbon cable. disconnect from the top under the glass not at the board. The connector there is just like the 7145 and works much better.

repeatcopiers
08-18-2010, 06:49 PM
Good to know, I actually still have a few of those in the field. Thanks

Custom Search