printech
01-14-2009, 09:00 PM
Hello technical people,
I have this Minolta EP2010 and try to use the ADF (I think is the AFR-2) but the originals do not travel all the way to the edge of the glass and appear skewd on the copies or the originals jam at some point because they tend to overlap on the glass. I replaced the transport belt because it looked too loose. There is any adjustment that should be done on the belt? Since I've started working on copiers (about 5 years ago) I haven't come upon one with an ADF which moves the originals by belt. I need help. Thank you!:confused:
I have this Minolta EP2010 and try to use the ADF (I think is the AFR-2) but the originals do not travel all the way to the edge of the glass and appear skewd on the copies or the originals jam at some point because they tend to overlap on the glass. I replaced the transport belt because it looked too loose. There is any adjustment that should be done on the belt? Since I've started working on copiers (about 5 years ago) I haven't come upon one with an ADF which moves the originals by belt. I need help. Thank you!:confused: