konica 2223

[issahodeh]

Please advice with : what the service adjustment codes that has to be done after replacing the ( Drum , Developer) for Konica 2223 . please in steps
Thanks

[Luther]

Check your private messages and good luck

[kiwitechnician]

Be sure you replaced the drum and developer then go

1.47 mode,code 91 start (clear the drum)
2.47 mode,code 90 start (clear the PM)
3. 47 mode,code 51 start( L-detection)

keep the order I have written otherwise you get F26 message.

[Zoren]

keep the order I have written otherwise you get F26 message.

i bet he can still reset that F26 in another developer setting... otherwise, it can be done in another sp mode....:)

[kiwitechnician]

I meant If you reset PM counter and then don't do L-detection I am sure you get F26 message.

[Zoren]

i know what u meant...

sometimes doing L-det. even with a new developer can get u an F26 code. experienced this in a dry and humid country...

[issahodeh]

many thanks for all of you