Oystercopy
07-29-2022, 12:21 AM
Hey guys... I had a transfer belt self destruct on me, the day after I put in all new Drum Units. I never did see anything where the drums being replaced could have caused the belt to fail. But after replacing the belt, I never could get the machine to come back to ready; just says "warming up" and tries to do a calibration ever minute or so. I believe I removed every piece of transfer belt from the machine, and cleaned the IDC sensor, but can't get it back. Even tried another Fuser.
Any help appreciated!
OC
Any help appreciated!
OC